Detacher brand DTKH intended for additional grinding Krupki and Dunston after roller machines with smooth (rough) rolls 1...2 and 4...grinding 11 grinding systems mill plants long products grinding wheat.
The machine is built for 3 category GOST 15150 in climatic version. "U" for the domestic market and export to countries with temperate climates. The machines must operate reliably at operating conditions at temperatures from minus 10 to plus 40°C, relative humidity of 80%, with a mean annual temperature of plus 15°C, atmospheric pressure from 650 to 800 mm Hg.St.(86,6106,7 kPa). Mode one-, two - and three-shift.
Specifications
Name of indicators
The value
Productivity, kg/hour
470 750...
The rotor's rotation frequency, Rev/min
696
Diameter of cylinder, mm
300
Rotor diameter, mm
290
The number of pests
4
The length of the beach, mm
470
Installed power, kW
1,5
The effect of destruction "pellet", %
90
Overall dimensions, mm:
length
width
height
680
370
630
Weight, kg
100
The structure and operation
The housing 1 is welded structure (Fig. 1) is mounted on the supports 2 and 3 made in the form of a cylinder of sheet steel, with two nozzles to supply 4 and output 5 of the product. In the middle of the hull on hinges hung door 6, which provides access to the rotor 7. Lid detacher interchangeable, made of sheet steel, with attached bearing housings, used for loading the bearings of the rotor and securing the appliance to the floor or the ceiling. The rotor is the main working body, is a shaft resting on two spherical ball bearings. On the hubs (the frogs) is rigidly fixed four beach that directly affect the product. The initial product – groats, dunst (small grains) – through the suction inlet into the housing, where, moving along a helix, crushed under shock and frictional effects of pests and inner surface of the housing, and then is output from detacher through the exhaust pipe.
